Inicio Blog Página 918

Científicos alertan sobre un nuevo brote mortal de un virus similar al Ébola en Bolivia

0

Un equipo de investigadores descubrió que un virus mortal que se encuentra en Bolivia, el Chapare, puede propagarse de persona a persona en entornos de atención médica, lo que genera preocupación ante potenciales futuros brotes, según los hallazgos presentados esta semana en la reunión de la Sociedad Americana de Medicina e Higiene Tropical.

El virus ya causó al menos cinco infecciones cerca de La Paz, en 2019, tres de ellas fatales. Antes de eso, el único registro de la enfermedad era un pequeño grupo y un solo caso confirmado en 2004 en la provincia de Chapare.

Sin embargo, el reciente brote sorprendió a las autoridades sanitarias, ya que inicialmente lo único que sabían era que este virus que pertenece a los arenavirus causa también fiebre hemorrágica, al igual que el Ébola, en los infectados con síntomas como fiebre, dolor de cabeza, dolor abdominal, sarpullido y en última instancia puede causar insuficiencia orgánica y hemorragia potencialmente mortales.

“Nuestro trabajo confirmó que un joven médico residente, un médico de ambulancia y un gastroenterólogo contrajeron el virus después de tratar a pacientes infectados, y dos de estos sanitarios murieron más tarde”, informó Caitlin Cossaboom, del Centros para el Control y la Prevención de Enfermedades (CDC).

La confirmación de la transmisión de persona a persona muestra, según Cossaboom, que cualquier persona que se ocupe de casos sospechosos debe tener sumo cuidado para evitar el contacto con elementos que puedan estar contaminados como sangre, orina, saliva o semen.

¿Hay riesgo?

Se desconoce dónde se originó el virus y cómo infecta a los humanos. En principio, se estima que los roedores fueron la fuente de la infección del agricultor. “La secuencia del genoma del ARN que aislamos en muestras de roedores coincide bastante con lo que hemos visto en casos humanos”, aseguró la investigadora.

Los científicos creen que el virus del Chapare podría haber estado circulando en Bolivia durante varios años, pero es posible que los pacientes infectados hayan sido diagnosticados erróneamente de dengue.

En principio, el riesgo de que pueda afectar a otros países es muy bajo, explicó al diario boliviano La Razón María E Morales-Betoulle, de la Subdivisión de Patógenos Especiales Virales de los CDC. “Se limita a Bolivia y a países vecinos, ya que los roedores en los que se ha detectado el virus son de esta zona. Pero hay que estar vigilantes porque existen muchos otros virus que pueden ser transmitidos por roedores, y los humanos cada vez estamos más cerca de ellos”.

Fuente: El Tribuno

En Salta se confirman 88 nuevos casos de coronavirus y 65 pacientes recibieron el alta

0

Ochenta y ocho (88) nuevos casos de coronavirus se confirmaron hoy en Salta y 65 personas se han recuperado, según el informe del reporte diario que brindó esta tarde la Dirección de Epidemiología.

Con los nuevos datos oficiales, la provincia suma 20.123 contagios desde que se inició la pandemia y 17.472 ya recibieron el alta, lo que representa un 87%.

De los nuevos casos positivos, 22 se reportaron en Capital, 15 en el departamento de Metán, 10 en General San Martín y 10 en Cafayate, entre los distritos con más casos.

Por otro lado, Salud reportó que 106 pacientes están internadas en terapia intensiva, 24 menos que el día anterior (el lunes se habían notificado 130 pacientes en esta situación). Y 47 internados están con asistencia respiratoria mecánica.

Además, se notificaron 4 nuevas muertes con respecto al reporte anterior y el total de decesos en la provincia es de 933.

Fecha: 17/11/2020 ( 17.00 hs)
Casos COVID-19 de residentes en la Provincia de Salta
DepartamentoCasos NuevosCasos Acumulados
Anta6482
Cachi086
Cafayate10334
Capital229908
Cerrillos8896
Chicoana2285
Gral. Güemes31156
Gral. San Martín101963
Guachipas036
Iruya069
La Caldera0229
La Candelaria025
La Poma026
La Viña0206
Los Andes0224
Metán15423
Molinos051
Orán82429
Rivadavia0209
Rosario de la Frontera1166
Rosario de Lerma3821
San Carlos071
Santa Victoria028
TOTAL8820123
COVID-19. Notificación de casos confirmados
por Departamento y Localidad de residencia
Fecha de Actualización: 17/11/2020
Departamento/LocalidadCasos notificadosTotal de casos acumulados
DEPARTAMENTO ANTA6482
AGUA CALIENTE01
APOLINARIO SARAVIA299
CEIBALITO00
CORONEL MOLLINEDO04
CORONEL OLLEROS03
EL QUEBRACHAL032
GAONA04
GENERAL PIZARRO08
JOAQUIN V. GONZALEZ2213
LAGUNA BLANCA00
LAS LAJITAS2106
NUESTRA SEÑORA DE TALAVERA02
PIQUETE CABADO01
RIO DEL VALLE09
TOLLOCHE00
DEPARTAMENTO CACHI086
CACHI063
EL BARRIAL01
PAYOGASTA022
DEPARTAMENTO CAFAYATE10334
CAFAYATE10334
LAS CONCHAS00
TOLOMBOM00
DEPARTAMENTO CAPITAL229908
ATOCHA017
CASTELLANOS03
LA CIENAGA01
SALTA209483
VILLA SAN LORENZO2404
DEPARTAMENTO CERRILLOS8896
CERRILLOS7612
LA ISLA03
LA MERCED1258
SAN AGUSTIN023
DEPARTAMENTO CHICOANA2285
AGUA NEGRA00
BARRIO LA ROTONDA00
CHICOANA2120
EL CARRIL0162
EL MOLLAR03
DEPARTAMENTO GENERAL GÜEMES31156
BETANIA03
CAMPO SANTO0187
COBOS08
EL BORDO0133
EL PRADO01
EL SAUCE01
GENERAL GUEMES3823
DEPARTAMENTO SAN MARTÍN101963
ACAMBUCO02
AGUARAY8261
CAMPAMENTO VESPUCIO014
CAMPICHUELO02
CAMPO DURAN02
CARBONCITO03
CORONEL CORNEJO01
DRAGONES07
EMBARCACION1187
GENERAL BALLIVIAN016
GENERAL MOSCONI0158
HICKMAN06
PADRE LOZANO01
PIQUIRENDA01
PROFESOR SALVADOR MAZZA0351
RECAREDO00
TARTAGAL1951
DEPARTAMENTO GUACHIPAS036
GUACHIPAS036
DEPARTAMENTO IRUYA069
ABRA DE ARAGUYOC01
ABRA DEL SAUCE00
COLANZULI00
IRUYA057
ISLA DE CAÑAS010
LA MESADA GRANDE01
DEPARTAMENTO LA CALDERA0229
CAMPO ALEGRE00
LA CALDERA058
LA CALDERILLA01
VAQUEROS0170
DEPARTAMENTO LA CANDELARIA025
EL JARDIN00
EL TALA020
LA CANDELARIA05
DEPARTAMENTO LA POMA026
CERRO NEGRO00
COBRES00
EL RODEO01
LA POMA025
DEPARTAMENTO LA VIÑA0206
AMPASCACHI00
CORONEL MOLDES0158
LA VIÑA038
TALAPAMPA010
DEPARTAMENTO LOS ANDES0224
OLACAPATO03
SALAR DE POCITOS00
SAN ANTONIO DE LOS COBRES0194
SANTA ROSA DE LOS PASTOS GRANDES07
TOLAR GRANDE020
DEPARTAMENTO METÁN15423
AGUA BLANCA02
EL GALPON039
EL TUNAL13
EL VALLECITO00
LAGUNITA00
LUMBRERAS03
METAN VIEJO112
RIO PIEDRAS018
SAN JOSE DE METAN13346
DEPARTAMENTO MOLINOS051
ALUMBRE02
LA PUERTA010
LURACATAO03
MOLINOS015
SECLANTAS020
SECLANTAS ADENTRO01
DEPARTAMENTO ORÁN82429
AGUAS BLANCAS039
COLONIA SANTA ROSA0274
EL TABACAL012
HIPOLITO YRIGOYEN0114
PICHANAL0105
SAN RAMON DE LA NUEVA ORAN81853
URUNDEL032
DEPARTAMENTO RIVADAVIA0209
ALTO DE LA SIERRA02
CAPITAN JUAN PAGE00
CORONEL JUAN SOLA095
LA UNION017
LOS BLANCOS04
PLUMA DE PATO04
RIVADAVIA028
SAN PATRICIO02
SANTA MARIA02
SANTA VICTORIA ESTE055
DEPARTAMENTO ROSARIO DE LA FRONTERA1166
ALMIRANTE BROWN00
ANTILLA01
COPO QUILE00
EL POTRERO00
ROSARIO DE LA FRONTERA1165
DEPARTAMENTO ROSARIO DE LERMA3821
AGUA CHICA01
CAMPO QUIJANO1383
EL ENCON02
EL ROSAL00
LA MERCED DEL ENCON00
LA SILLETA087
ROSARIO DE LERMA2348
DEPARTAMENTO SAN CARLOS071
ANGASTACO035
ANIMANA029
CORRALITO00
SAN CARLOS07
DEPARTAMENTO SANTA VICTORIA028
ACOYTE03
ANTIGAL01
EL PUESTO01
LA HUERTA01
LOS TOLDOS07
MECOYITA00
NAZARENO010
POSCAYA01
SANTA VICTORIA04
TOTALES8820123

Fuente: El Tribuno

Una familia necesitó de casi 50 mil pesos en octubre para no ser pobre

0

El costo de la Canasta Básica Total (CBT), que define el nivel de pobreza, subió a $49.912 en octubre último para una familia tipo y aumentó 5,7% con respecto a septiembre, informó hoy el INDEC.

Esta variable clave registró su mayor incremento en dos años y creció por encima de la inflación por segundo mes consecutivo.

La Canasta Básica Alimentaria (CBA), que define el nivel de indigencia, registró en el mismo mes un costo de $20.710, y aumentó 6,6%.

En los últimos doce meses la canasta alimentaria registra un aumento del 45,8% y la canasta básica aumenta 40%, ambas por encima del costo de vida del 37,2%.

Desde diciembre último, el costo de la canasta total creció 28,1% y el de la alimentaria 32,9%, por encima de la inflación del 26,9% en ese período.

El costo de la canasta total en los primeros diez meses del año aumentó $10.951 y el de la alimentaria subió $5.126.

El costo de la canasta total casi triplica el salario mínimo vital y móvil, que desde octubre se fijó en $18.900 los trabajadores mensualizados que cumplen jornada legal completa de trabajo.

Los datos reflejan un incremento en los niveles de pobreza e indigencia en medio de la pandemia.

Para una familia de tres miembros, el costo de la Canasta Básica Total fue en octubre de $39.735 y la Alimentaria de $16.488.

En un hogar de cinco integrantes la canas total fue de $52.496 y la alimentaria de $21.783.

Para un solo adulto, el INDEC estimó que en octubre el costo de la canasta total fue de $16.152 y la alimentaria en $6.702.

La canasta alimentaria está integrada por los artículos que reúnen los requerimientos calóricos y proteicos necesarios para un varón adulto, y la total incluye estos alimentos más el costo de servicios públicos y otros gastos.

Fuente: El Tribuno

Otro Chalchalero al cielo: Murió el folclorista Eduardo «Polo» Román

0

Murió el Polo Román. La triste noticia golpea en Salta, en el mundo de la música criolla y especialmente en el folclore.

Hoy nos deja otro de los miembros de Los Chalchaleros. Falleció a los 83 años en Mar del Plata, donde residía desde hace tiempo. El nacido en Cafayate fue el intérprete de “En esta zamba ausente”, entre otros temas. 

El pasado 7 de marzo, Polo Román cumplió 83 años y fue uno de los primeros integrantes del afamado grupo folclórico salteño.

En 1966, Víctor Zambrano deja la banda y en su lugar entra Eduardo “Polo” Román, quien debuta en enero de 1966 en el disco “En esta zamba ausente”.

Los Chalchaleros, integardo por Facundo y Juan Carlos Saravia, Polo Román y Pancho Figueroa.

En 1967, tras 16 años, Dicky Dávalos también se va del grupo, dando lugar al chaqueño Francisco “Pancho” Figueroa, quien debuta en “Los Chalchaleros por el mundo”.https://www.facebook.com/plugins/video.php?height=314&href=https%3A%2F%2Fwww.facebook.com%2Feltribuno%2Fvideos%2F10155229738581020%2F&show_text=false&width=560

Las redes sociales se inundaron con mensajes de despedida para quién tocaba el bombo y cantaba en los «chalcha». 

Luego de la separación del grupo, el Polo formó una nueva banda que se llamó «Polo Román y Salta Trío». Esta propuesta musical nació en el año 2016 de la mano del exchalchalero, quien sumó a Félix, Marcelo Mena y Gustavo Ciansi.

Cabe recordar que Juan Carlos Saravia, uno de los fundadores de Los Chalchaleros, también falleció este año, el 17 de enero.

Fuente: El Tribuno

Argentina mostró una imagen sólida y tuvo el cierre que esperaba, con triunfo sobre Perú

0

1 / 5

El seleccionado argentino cerró el año con una buena victoria frente a Perú por 2 a 0, en el Estadio Nacional, de Lima, por la cuarta fecha de Eliminatorias Sudamericanas, que estuvo regada por pasajes de buen fútbol y un juego colectivo muy prometedor.
La prodigalidad de Lionel Messi, recuperando pelotas hasta en posición de lateral derecho, fue todo un símbolo del accionar de este equipo dirigido por Lionel Scaloni que venía de dejar sus primeras dos unidades ante Paraguay, en la Bombonera, pese a jugar un buen segundo tiempo.
Es que Argentina tuvo como propuesta la presión alta, que al principio no fue acompañada por la segunda línea de marca en la media cancha, lo que les permitía a los peruanos saltarla para meter la pelota en terreno de la defensa «albiceleste».
Pero conforme Leandro Paredes especialmente, auxiliado por un incansable Rodrigo De Paul, empezaron a hacer pie detrás de esa primera «presión blanda», Argentina se adueñó del desarrollo del encuentro y ya no lo abandonaría hasta el final de los 90 minutos.
Entonces su juego pasó a la fase ofensiva, donde otra vez volvió a acertar Scaloni con la inclusión de Nicolás González, pero esta vez no como lateral izquierdo sino como delantero por ese costado.

El gol de Nico González

Y además el técnico instruyó a Giovani Lo Celso para que se conectara con él, algo que dio sus frutos en apenas un cuarto de hora, cuando el volante del Tottenham Hotspur habilitó al del Stuttgart alemán para que éste convirtiera con un zurdazo cruzado el primer gol argentino y el segundo en su cuenta personal después del anotado en el 1-1 con Paraguay, que en esa oportunidad fue de cabeza.
Y la endeblez de la defensa peruana también colaboró para que una vez que Argentina recuperaba el balón de la posesión tibia y hasta tres cuartos de cancha que ejercían los de Ricardo Gareca (están últimos con un punto en cuatro juegos), generara peligro constante en las inmediaciones de la valla defendida por Pedro Gallese.
Y de la claridad y el pase filtrado de Messi primero y Paredes después llegó el segundo tanto argentino en los pies de un definidor notable como Lautaro Martínez, que cerró prematuramente la historia cuando todavía no se había jugado media hora del período inicial.
Después de eso todavía quedó un cuarto de hora de ese primer tiempo y todo el segundo para que Argentina fuera por más, algo que hizo con un Messi siempre esforzado, jugando para un equipo que jugó en equipo, y que pudo aumentar tranquilamente si en el toque final los ejecutores hubiesen ajustado apenas unos pocos centímetros la mira.
Pero más allá de eso, lo interesante fue que Argentina pareció empezar el desproceso de la «Messi dependencia» en el último partido del año, lamentablemente cuando ahora se vendrá una pausa de casi cinco meses hasta que vuelva a jugar el 25 de marzo del año próximo.

La gran definición de Lautaro Martínez

Pero por otra parte es ilusionante lo de hoy de cara al compromiso de ese día en que Argentina deberá recibir a Uruguay, que ya no contará con el suspendido Edinson Cavani, y sobre todo el que llegará el 30 de ese mes nada menos que visitando al líder de estas eliminatorias con puntaje ideal de 12 unidades: Brasil.
Pero Argentina, que hoy lo escolta con 10 puntos, mostró que a dos años exactos del comienzo del Mundial de Qatar 2022, que se jugará en noviembre, el equipo por fin empezó a dar atisbos de tal, con algunas «sociedades» como las que pregonaba César Menotti, por caso la integrada por Lo Celso y González, que también supo asociarse bien en la salida por izquierda con Nicolás Tagliafico, o la de Paredes-De Paul por el medio.

«Este es el camino», dijo Messi

Y todavía hay jugadores como Sergio Agüero, Paulo Dybala o Germán Pezzella que están afuera por distintas razones, de cara al juego con los uruguayos especialmente este último, ya que hoy Nicolás Otamendi llegó a la segunda tarjeta amarilla y no estará presente en el próximo partido por la quinta fecha de eliminatorias que se jugará en el flamante Estadio «Único», de Santiago del Estero.
Después de esos dos compromisos llegará la Copa América en la que Argentina será local y solamente saldría del país para disfrutar de la buena noticia de que jugaría la final en Colombia.

¡¡¡Lo que se perdió el capitán!!!

Pero para eso falta bastante, y al menos en un año tan ajetreado como los días que hoy está viviendo el pueblo peruano, atravesado por una crisis institucional que repercute en lo social e hizo peligrar la realización de este partido, las próximas fiestas las van a pasar los jugadores y el cuerpo técnico con la tranquilidad de que encontraron cual es el camino por el que deben transitar, con Messi y no desde Messi.

La síntesis

Perú: Pedro Gallese; Aldo Corzo, Ánderson Santamaría, Luis Abram y Miguel Trauco; Pedro Aquino, Yoshimar Yotún, André Carrillo y Edison Flores; Christian Cueva y Gianluca Lapadula. DT: Ricardo Gareca.

Argentina: Franco Armani; Gonzalo Montiel, Lucas Martínez Quarta, Nicolás Otamendi y Nicolás Tagliafico; Giovani Lo Celso, Leandro Paredes y Rodrigo De Paul; Lionel Messi; Lautaro Martínez y Nicolás González. DT: Lionel Scaloni.

Goles en el primer tiempo: 1m. González (A) y 27m. Martínez (A).
Cambios en el segundo tiempo: 11m. Lucas Ocampos por De Paul (A), 24m. Luis Advíncula por Corzo (P) y Andy Polo por Flores (P), 26m. Ángel Di María por González (A), 35m. Raúl Ruiz Díaz por Cueva (P), 43m. Horacio Calcaterra por Yotún (P), Wilder Cartagena por Aquino (P) y Alejandro Gómez por Martínez (A).
Amonestados: Aquino, Trauco, Gallese (P). Otamendi, Lo Celso y Ocampos (A).

Estadio: Nacional, de Lima.
Árbitro: Wilmar Roldán (Colombia).

Fuente: El Tribuno

VIDEO. Robo de caños: así fue la detención del exintendente Jorge Prado

0
https://www.facebook.com/plugins/video.php?height=314&href=https%3A%2F%2Fwww.facebook.com%2Feltribuno%2Fvideos%2F737005176902629%2F&show_text=false&width=750

A partir de un pedido del fiscal federal Eduardo José Villalba, el juez federal de Garantía de Oran, Gustavo Montoya ordenó la detención del ex intendente Jorge Enrique Prado en el marco de la investigación penal que se lleva adelante por el robo de caños del Gasoducto NEA.

El operativo estuvo a cargo de Gendarmería en colaboración con personal de la Unidad de Investigaciones de Delitos Complejos y Judiciales de Salta.

FOTO: WALTER ECHAZÚ

Al respecto, cabe señalar que está tarde la fiscalía amplio el objeto de la investigación en contra del ex intendente de Aguaray; el ex secretario de Hacienda de ese municipio, Fredy Céspedes y el.empresario mendocino Diego Alos.

En ese planteo, el fiscal fue contundente respecto a las pruebas reunidas en contra de los acusados, entre las cuales destacó la declaracion de un imputado colaborador, informes de pericias y otras testimoniales.

La fiscalía, en vista de estas nuevas pruebas presentadas, ratificó la acusación en contra de Prado, Céspedes y Alos por los delitos de robo agravado, fraude a la administración pública y falsificación de instrumento privado.

Asimismo, señaló que aún resta la realización de otras medidas probatorias, razón por la cual solicito la prisión preventiva de Prado a fin de evitar que el acusado entorpezca las pruebas pendientes.

A ello, Villalba sumo el hecho de que existen muchas probabilidades de que, llegado al fin del proceso, Prado reciba una pena de prisión efectiva, siendo está otra causal que llevo al juez a disponer la detención de Prado.

Fuente: El Tribuno

Enargas celebró la reactivación del Gasoducto del Noroeste Argentino

0

El Enargas garantizó que cumplirá con su función de establecer tarifas justas, razonables, accesibles y asequibles para los nuevos usuarios.

El Ente Nacional Regulador del Gas (Enargas) «celebró y elogió» la reactivación de las obras del gasoducto del Noreste Argentino (GNEA), y garantizó que cumplirá con su función de establecer tarifas justas, razonables, accesibles y asequibles para los nuevos usuarios.

El viernes pasado, la empresa Integración Energética (Ieasa) decidió retomar las obras del Gasoducto del Noreste Argentino, al levantar la suspensión que recaía sobre el proyecto desde 2018, lo que permitirá culminar la iniciativa que beneficiará a 378.000 hogares de esa región del país.

Tras ese anuncio de la ex Enarsa, el ente regulador expresó hoy mediante un comunicado que «celebra y elogia la reactivación del GNEA, comunicando a la ciudadanía que ejercerá, coordinadamente y siempre en el ámbito de su competencia, todas aquellas acciones de carácter técnico y regulatorio que contribuyan con esta trascendental decisión».

Una vez que el GNEA se encuentre en condiciones de brindar el servicio para el que fue creado, el Enargas «cumplirá con su función de establecer tarifas justas, razonables, accesibles y asequibles».

«En este sentido, habilitará los mecanismos necesarios para la participación ciudadana (Audiencias) y garantizará el cumplimiento de los principios de transparencia, acceso no discriminatorio e igualdad de los oferentes respecto de la capacidad de transporte disponible», expresó el organismo que se encuentra bajo la intervención de Federico Bernal.

El GNEA es el único gasoducto de transporte de gas natural diseñado y construido por el Estado argentino luego de que este servicio público fuera privatizado en el año 1992, y como tal fue declarado de Interés Público Nacional mediante el Decreto 267 del 2007.

Con casi 1.500 km de longitud solo en su sección troncal de 24″ de diámetro, representa «un estratégico proyecto de infraestructura energética llevado adelante por la empresa Enarsa para el abastecimiento con gas natural a cientos de miles de usuarios y usuarias de la región noreste de nuestro país, debiendo agregarse los segmentos comerciales e industriales de la misma zona».

El ente entendió que el proyecto fue «injustificadamente suspendido por la administración anterior», por lo que se retoma una obra «fundamental para llegar con el servicio público de gas natural a todos los argentinos, abriendo la puerta a futuras exportaciones hacia los países vecinos y brindando una contundente señal al sector del upstream».

A partir del anuncio, la empresa Ieasa, presidida desde marzo por Andrés Cirnigliaro, tiene como primer paso iniciar conversaciones con las contratistas que habían sido originalmente adjudicatarias de las obras par buscar destrabar la continuidad de los trabajos. En caso de no poder llegarse a un acuerdo, la empresa deberá iniciar un nuevo proceso de licitación.

La decisión de reanudar la obra fue informada en los primeros días de junio, tras la visita que el presidente Alberto Fernández realizó a la provincia de Formosa.

Fuente: ambito.com

El Congreso provincial del PJ se reunirá el 30 de este mes

0

La mesa de conducción ejecutiva del PJ, que preside Pablo Kosiner, convocó para el 30 de este mes al Congreso provincial del partido, que preside Marcelo López Arias, para que cumplan con la sesión ordinaria anual de manera virtual.
También se aprovechará el plenario para que el Congreso provincial partidario delegue en la Comisión de Acción Política (CAP), a cargo del saencista, Pablo Outes, facultades relacionadas con los procesos electorales del próximo año.
Luego de que JUAN MANUEL URTUBEY y Manuel Godoy dejaron la conducción, el PJ inició un proceso de reorganización con el objetivo de apoyar las gestiones de Alberto Fernández a nivel nacional y de Gustavo Sáenz en la provincia.
La última reunión del Congreso partidario se realizó en agosto pasado para designar a los miembros de la CAP, paso sobre el que Kosiner aseguró que fue una señal para avanzar en la unidad y reorganización del partido.
El Congreso provincial del PJ fue convocado para el día 30 de este mes, a sesionar, a partir de las 17, bajo la modalidad no presencial remota a través de la plataforma de videoconferencia zoom.
Además de la designación de tres miembros para integrar la comisión de poderes y someter a aprobación el acta anterior, se pondrá a consideración la delegación a la Comisión de Acción Política de atribuciones que tiene el congreso para procesos electorales.
Con este paso, será la CAP que preside el saencista Outes quien decida sobre la abstención a elecciones provinciales o municipales, el apoyo a fórmulas mixtas y a candidatos no afiliados.
También decidirá sobre alianzas electorales, pactos partidarios, listas mixtas, entendimientos o cualquier fórmula posible de acuerdo a apoyo a candidatos no afiliados.
Asimismo, podrá decidir que sean postulados a cargos partidarios o a cargos electivos quienes no tengan una antigüedad mínima como afiliado. 
En la sesión del 30 de este mes, los congresales del PJ designarán cinco afiliados para integrar el Tribunal de Disciplina y considerarán el balance anual del partido
Este punto no será un tema menor para el plenario por la disminución de ingresos de recursos que se observa en los últimos tiempos debido a la sensible caída de los aportes.
La reducción de ingresos es atribuida a la reducción que en las últimas elecciones tuvo el PJ de legisladores nacionales y provinciales, de concejales, y con la nula presencia de funcionarios.
El orden del día también dispone la aprobación, o no, del informe anual del Consejo provincial, que preside Kosiner, sobre la labor cumplida durante este año. 
Los congresales justicialistas, además, deberán considerar los informes de los legisladores nacionales, de los bloques de senadores y diputados provinciales sobre la labor cumplida y el informe de la renovada CAP.
La mesa directiva del Congreso partidario se encargará de coordinar los aspectos de logística, técnicos y administrativos para el desarrollo y funcionamiento de la sesión no presencial remota.
Esta mesa se constituirá en la sede del PJ ubicada en calle Zuviría 938 de la ciudad de Salta, respetando los protocolos sanitarios y las normativas nacionales y provinciales vigentes.

Fuente: El Tribuno

Chief Technology Officer Cto Definition

0

I’m always cautious to avoid us turning our beautiful product, into a user mess. It’s always entertaining how their one dimensional brains come up with such imaginative ideas for products, particularly when you realise they are still trying to remember their password . For any sales director stumbling across this article, the password is normally your eldest name and their year of birth. Then, with something of a heavy heart, it’s across to sales to find out what mythical version of software they have sold and promised to customers today.

By taking a look through resumes, we were able to narrow down the most common skills for a person in this position. We discovered that a lot of resumes listed management skills, problem-solving skills and time-management skills. CTOs typically need at least 10 years of experience in IT and management.

They may opt to invest in new equipment or reallocate resources to boost efficiency in the office. To be a CTO, you must be able to confidently make choices that might have a significant impact on your firm. Because they supervise managers and teams, they guarantee their performance is at its highest level. CTOs must be able to assign duties, interact with their teams, and give mentoring when necessary to be successful. Technical lead – builds mvps, hires software developers and team, guides team about strategic plans, improves on app architecture. Why we felt the need to explain the CTO roles and responsibilities is the fact that the CTO position is the most understated among C-level management.

They usually start in entry-level roles in technical support, development and programming, database and network administration or engineering. After several years, they typically enter a management or leadership role, where they get the necessary leadership skills. Since CTOs need knowledge of every department role, experience in several different technology positions is valuable. A chief technology officer is the highest technology executive position within a company and leads the technology or engineering department.

Chief Technology Officer Faqs

After messing up with the sales teams heads, it can be an event like a board meeting If the investor director is attending then it’s normally decent coffee and chocolate hob-nobs. The Chief Technology Officer typically reports to the Chief Executive Officer to select software and other technologies in accordance with the Chief Executive Officer’s long-term vision for the company. Creating timelines for the development and deployment of all technological services.

  • You may choose not to attend all meetings but I find it useful to attend at least one a week.
  • This CTO will also look at how to further implement new technologies within the company to ensure its success.
  • Among chief technology officers, 8.4% of them are women, while 91.6% are men.
  • We determined these as the best states based on job availability and pay.
  • And last but not the least, a CTO should have leadership skills to effectively steer the technological side of the company in the right direction.
  • They work closely with Executives and IT personnel to remove outdated systems and replace them to maintain a competitive edge in their industry.
  • The main difference between a Chief Technology Officer and a Chief Operating Officer is that the Chief Technology Officer focuses specifically on how IT software and related technologies influence company operations.

DevOps contact us in the meeting to state that a data supplier API has fallen over so we automatically switch to a cached version whilst it was down. Time to call supplier and get an explanation, emphasise that it cannot happen again. All members have read my report, digested and understood it, come up with some thoughtful questions and congratulated me for my hard work. Attend a stand up meeting where the approach will depend on the size of your team and lots of discussion about what is theoptimum size of a teamIf the team is small then I’m scrum master and leading the meeting.

We expect you to be well-versed in current technological trends and familiar with a variety of business concepts. If you are also an excellent communicator and public speaker, we’d like to meet you. Investopedia requires writers to use primary sources to support their work. These include white papers, government data, original reporting, and interviews with industry experts. We also reference original research from other reputable publishers where appropriate. You can learn more about the standards we follow in producing accurate, unbiased content in oureditorial policy.

The CTO title has been in use for over 10 years, but there is still confusion about the role and how it differs from the CIO. The title first developed at dot-com companies in the 1990s and then expanded to IT departments. The CTO role became popular as the information technology industry grew, but it is also used in other industries such as e-commerce, healthcare, telecommunications, and government.

You will work directly under the CEO and will act as both a technology and business expert, making decisions that will impact the current and future operations of the company. Information management technology is the distribution, organization, and control of the technology and data of a business. In 2009, the White House announced the appointment of the country’s very first CTO, an official in the Office of Science and Technology Policy. This official’s main focus is to use technology to help stimulate job creation, improve healthcare and security systems, and increase broadband access.

Becoming A Chief Technology Officer Cto

Their professional experiences enable them to oversee company operations and identify areas to implement new IT systems or technologies. On a typical day, a Chief Technology Officer starts by reviewing their email and voicemail to check for any missed messages from executives, company stakeholders or managers. They meet with executives to discuss the company’s current financial stability, business opportunities and other news.

Product owners – upscale the product on every stage, advise on new engaging features based on market research. Production releases happen on Wednesday, just in case anything crops up that we have time to roll back during the release. Never release on Friday, for the same reason never have a major hospital operation on a Friday afternoon.

There is a big difference between the average CTO pay in New York City and the rest of the country. A profit-sharing arrangement, for example, may net a chief technology officer an extra $20,000 a year. During downtime in their office, they review technology trends within their company’s industry and identify the types of IT systems that competitors use. They use this information to draft proposals for new technologies to implement in company operations. Top 5 chief data officer interview questions with detailed tips for both hiring managers and candidates.

The CTO is responsible for technologies that grow the business externally, implementing services and products that serve clients and customers. Understanding the principles of a company’s operations is essential for the chief technology officer. For this expert to be successful, they must have a thorough understanding of their company’s demands and a strong grasp of business practices. A good Chief Technology Officer has excellent written and verbal communication, allowing them to communicate with other Executives or lower-level management in a clear and effective manner. They should have a background in IT and have experience working in a business development role.

A good communicator, able to communicate with all business stakeholders includes business ideas, technical information and solutions. Second, as the startup evolves, its challenges and needs change and so does the role and requirement of a CTO. Analysis of our competitors by the product manager and a list of new functionality that we could do with. Priorities are based on user needs and our ability to implement in a timely manner. They’re probably off on some team bonding yoga session or being massaged by goldfish. All of which will soon result in the release of version 2.61 (from 2.60) being promoted as a fundamental paradigm shift as we become the Uber of X.

Decision making, CTO has to make important decisions like hiring resources, assigning tasks, meeting deadlines. Two interviews with senior Java Developers both high calibre and passed the relevant technical tests and team interviews (crucial to stress test fit’). All part of a strict employment process which means we have a higher retention rate and everyone has going through the process, so the team knows that a new starter is up to scratch. Lots of robust conversations about whether we absolutely need to have the functionality or not.

Working As A Chief Technology Officer

A chief information officer is the company executive responsible for the management and implementation of information and computer technologies. Although there is overlap between the two positions, since both deal with IT, CTOs generally look outward, using technology to improve the company’s customer experience—the use of the goods and services. CIOs generally look inward, developing and using technology to improve the company’s procedures and operations. This kind of CTO will help set up the corporate strategy and fuel technological infrastructure, will analyze target markets, and create business models. Additionally, the CTO will have a close relationship with the CEO and other members of the company’s senior management. And last but not the least, a CTO should have leadership skills to effectively steer the technological side of the company in the right direction.

What are the tasks of a CTO

In this role, a CTO will act as a liaison between the customer and the business by taking on the responsibilities of customer relations, getting a grasp on the target market, and helping deliver IT projects to market. Depending on the company, a CTO may play one of several roles, including strategic planner, customer relations liaison, and overseer of infrastructure. This all led to the creation of the position of Chief Technology Officer by large companies in the late 1980s what is the primary responsibility of the cto? with the growth of the information technology industry and computer companies. In the United States, the average salary for a CTO ranges between $130,000 and $195,000 per annum depending on the company’s sector. According to a 2018 report from the InfoSec Institute, CTOs in the financial sector earn around $200,000, while e-commerce CTOs earn around $76,000. Their main goal is to create a technology vision for the company that aligns with its overall aims and objectives.

Understanding The Role Of The Chief Technology Officer Cto

However, as technology continued to advance, there was a growing need to separate the CIO job into two roles to ensure a company’s success. A CTO should be aware of new and existing technologies to guide the company’s future endeavors. The attributes of the roles a CTO holds vary from one company to the next, mainly depending on their organizational structure. According to the firm and sector in which they operate, the responsibilities of a CTO might vary greatly.

A chief technology officer is the executive in charge of an organization’s technological needs as well as its research and development (R&D). Also known as a chief technical officer, this individual examines the short- and long-term needs of an organization and utilizes capital to make investments designed to help the organization reach its objectives. The CTO usually reports directly to a company’s chief information officer , but may also report to the chief executive officer of the firm. Most chief technology officers hold at least a bachelor’s degree in computer science, business administration, or a related discipline. You must possess communication, software development, financial management, strategic planning, and analytical skills. You may find that experience in other jobs will help you become a chief technology officer.

What are the tasks of a CTO

The top 10 percent makes over $240,000 per year, while the bottom 10 percent under $98,000 per year. Start your career in a technical role such as Software Developer, Programmer, Systems Analyst, etc. to understand how the real tech world works. Becoming a Chief Technology Officer https://globalcloudteam.com/ is a goal that has no fixed career path. The great advantage of this is you can choose your technical career in the way you want and still end up as a great CTO in the future. However, there is also a lot of confusion about how to get there because there is no clear path.

Strategic Planner

Technology startups business plan is helpful in testing the viability of your new product, fundraising, business loan, and more. We believe not just the skills but trustworthiness is another core thing to consider while hiring CTO for a startup. Time management – solid and timely product delivery in every phase, responsible for assigning tasks and setting deadlines. Leadership, he typically works with teams and ensures high productivity by motivating the team.

Cto Responsibilities In A Startup

In fact, many chief technology officer jobs require experience in a role such as senior software engineer. Meanwhile, many chief technology officers also have previous career experience in roles such as software engineer or consultant. In non-technical organizations as a corporate officer position, the CTO typically reports directly to the chief information officer and is primarily concerned with long-term and «big picture» issues .

They should know how to inspire and retail the best technical talent because great companies are created by teamwork in the direction of a great leader. The main role of the CTO is to manage the technical aspects of a company and ensure that they provide the maximum benefit. However, this role also has managerial aspects where the CTO has to manage and supervise the entire IT department so business skills are a must. The ability to use technological know-how to further the business objectives is a very important part of this. As far as it comes to technology, the Chief Technology Officer is where the buck stops in a company!

The CTO is the head of all the technological requirements in the company and focuses on both the long-term and short-term tech needs that will help the company reach its objectives and remain profitable. Normally, the CTO heads the entire IT department in a company and oversees all the IT senior managers while being answerable only to the Chief Executive Officer in the company. As a result of their expertise in both technology and business, CTOs can give their organizations the most up-to-date and successful solutions.

C-Suite is a widely-used informal term used to refer collectively to a corporation’s most important senior executives—as in CEO, CFO, and COO. The offers that appear in this table are from partnerships from which Investopedia receives compensation. The average base salary of a CTO in 2022, according to Salary.com, as of Jul. 14, 2022.

Выбор Первого Языка Программирования

0

Чтобы «снабдить» их бесконечными возможностями, необходимо максимум усилий со стороны программистов и специалистов по продвижению и продаже компьютеров. Лучше всего я знаю «всемирную паутину» World Wide Web (я кодил за деньги на языках программирования Java, JavaScript, Python, Perl, PHP, Clojure, и XSLT). Но «паутина» представляет собой только маленькую часть огромного мира создания программного обеспечения.

Естественно, в рамках одной статьи трудно даже мельком рассмотреть все стороны такого большого проекта, как Fortress. Но организационный аспект любого открытого и претендующего на продолжительный период развития проекта – вещь исключительно важная. Fortress, как ориентированный на научное https://deveducation.com/ сообщество инструмент, имеет свою аудиторию, но благодаря особенностям разработки и ее доступности заслуживает куда большую. Сейчас Fortress-сообщество, например, нуждается в расширении библиотек развитых структур данных, вычислительных алгоритмов, биндингов с языками высокого уровня.

Рекурсивные функции и процедуры в них поддерживались механизмом управления памятью, основанном на концепции стека. Algol же в программистский арсенал привнес развитую систему типов и способы структурирования данных и программ. Применение языков программирования в web-разработках. Создание документа с поддержкой гипертекста с помощью HTML. Компилятор поддерживает несколько языков, но в первую очередь предназначен для C и C++.

Прекрасный способ для реализации подобных планов – поместить свои намерения в API, SDK и IDE. Вот почему так много единиц программного обеспечения для написания программных продуктов предлагается бесплатно. Это стимулирует развитие еще большего количества программного обеспечения. Они публикуют руководства для создания интерфейсов и дают людям инструментарий для оформления приложений в предсказуемом виде, который будет понятен конечным пользователям. Apple устанавливает набор потоков, которым нужно следовать. Предположим, вы создаете приложение подкастинга, и воспроизведение аудио файла является ключевым фактором.

В версии 4.0 СП MSC ключевые слова const и volatile зарезервированы, но использовать их невозможно. В версии 5.0 СП MSC ключевое слово volatile реализовано лишь синтаксически, а const — полностью (как синтаксически, так и семантически). В СП ТС и const, и volatile полностью реализованы. В версии 4.0 СП MSC ключевое слово interrupt не реализовано. Начиная с 8 версии Java приобретает механизмы функционального программирования (такие как ссылки на функции и лямбда-выражения), что позволяет легко создавать программы, которые могут выполняться на нескольких ядрах одновременно.

Хотите помочь пообщаться банкирам разных банков между собой конкретно в 17 часов и 1 минуту? Нужно создать таблицы, диаграммы, пачки бумажной документации, проекты на пять лет? Он не впечатляет с первого взгляда, но достаточно предсказуемый. Это язык для создания крупных проектов на больших площадках с многочисленными коллективами. Еще в 1980-х годах, когда программисты Fortran были заняты оптимизацией мощности ядерного арсенала, специалисты Lisp создавали программу для робота в виде плюшевого медведя, или написания сонетов.

Коды, Изменившие Мир

Таким образом от платформы зависит не код, а Java-машина. Установив соответствующую Java-машину на каждую платформу, наш код будет одинаково работать на каждой из них. Однако, Java не поддерживает объявление переменных с помощью var и, возможно, никогда не будет поддерживать. Существует логический лимит, дальше которого оптимизировать невозможно.

  • Существует функция под названием квадраты целых чисел.
  • Конечно, это имеет место везде, где работают умные люди.
  • Вам нужно создать план действий, но в общих чертах вы сможете обойтись чтением блогов и пройти чужим путем.
  • PHP имеет довольно простой синтаксис и отличается низким порогом входа по знаниям.

Процессорам Athlon компания AMD уже давно назначает некий рейтинг, являющийся мерой их интегральной производительности. Поэтому одной из наиболее существенных здесь является проблема унификации результатов. В данном исследовании производительность поставлена в соответствие реальной частоте, на которой работает процессор.

Но первым человеком, обогнувшим Землю, стал раб. На одном из островов раб Магеллана Энрике, родившийся на Суматре, встретил людей, говорящих на его языке. Особенно удилищаAzura FortranNeoактуальны при береговой ловле, когда для приманок разного типа и веса используется одно удилище.

2 От Аппаратного До Программного Обеспечения

К таким языкам относятся язык Java, LISP, Perl, Prolog. Компилирующие интерпретируемый код, для выполнения которого требуется дополнительное программное обеспечение. К низкоуровневым свойствам Fortress следует отнести полноценную поддержку Unicode. Несмотря на кажущуюся скудность, этот перечень нововведений стал основой множества вариаций, модификаций и дальнейших развитий базовых идей. Настолько большого множества, что, кажется, удивить чем-то новым в «еще одном языке программирования» (YAPL уже стала расхожей аббревиатурой, Yet Another Programming Language) трудно.

Программисты могут учиться, проходить тестирование и получить официальные сертификаты по многим технологиям. У программистов Java был достаточно круг возможностей для выбора. Язык Lisp применяется в системах данных об авиационных перелетах, созданных ITA, которые были приобретены Google.

что такое фортран

Я потратил сотни, а может, тысячи часов, создавая программы в РНР, когда я не знал, что я делаю. Перезагружал веб-страницы, пока мои пальцы не начинали страшно болеть. Все было взломано, и люди проникали на мои страницы. Мне приятно видеть, как он смог обойтись без посторонней помощи.

Он находит применение также в сельском хозяйстве. Язык начали разрабатывать как средство для программирования интерактивных телевизоров. Изначально он назывался Oak («Дуб»), но из-за конфликта с авторскими правами пришлось его переименовать. Название взяли в честь одноименного кофе, на что намекает официальный логотип.

Что Такое Язык Программирования?

Но если посмотреть на выше упомянутые два способа ускорения программ — там нет пункта о добавлении ядер. Чтобы программу можно было ускорить с помощью дополнительных ядер — она должна быть способна выполняться независимыми частями. Java, как почти все современные языки – это объектно-ориентированный язык, на котором достаточно просто моделировать процессы реального мира, и пользоваться всеми преимуществами объектно-ориентированного подхода. Попытаемся разобраться почему Java выбирается в современных проектах в качестве основного языка программирования. Отчеты о доходах, аналитические отчеты, перечни новых рынков для захвата, все формы данных о новых клиентах, которые вы будете дробить на части и распределять. В этом будет заключаться ваша роль, как владельца глобальной базы данных намерений клиента.

Первым «взрывом» в синтаксисе и семантике в свое время прогремел знаменитый FORTRAN – он приблизил форму записи и смысл математических выражений на языке программирования к привычным для математиков, инженеров, физиков. Удивительно, но по прошествии стольких лет ничего более существенного в этом смысле сделано не было. У кого-то, естественно, возникнет вопрос – а так ли это важно? Хотя бы потому, что следующее утверждение очевидно – сокращение дистанции между языком спецификаций и языком реализации всегда означает уменьшение количества источников ошибок. А язык спецификаций – это естественный для прикладных специалистов язык, в том числе и формулы в их естественном, математическом представлении. Большая часть этого процесса состоит в том, чтобы «упаковать» старый код в красивую обертку хорошо организованных функций языка Python.

Большинство языков можно загрузить для использования бесплатно. Неужели именно эту процедуру мы выполняем с отдельными буквами, компилируя программу в сборку ненастоящего языка для того, чтобы несуществующий компьютер смог вывести на монитор поочередно каждую букву в отдельности? Аналогичный принцип применяется к каждому пикселю на вашем дисплее, каждой частоте, закодированной на ваших файлах в формате МР3 и каждому виртуальному кубику в компьютерной игре Minecraft. Вычислительная обработка данных трактует человеческий язык, как произвольный набор символов в определенной последовательности. Таким же образом она «воспринимает» музыку, изображение и кинофильмы.

И эта программа может быть использована так часто, как вы пожелаете. Второе, вы можете вывести на дисплей все, что захотите, а не только одну фразу. Вы можете повторять этот процесс до бесконечности, и ничто не остановит вас за исключением поломки устройства, или тепловой смерти Вселенной. Естественно, что никто из нас, за исключением героя Джека Николсона в культовом фильме ужасов Стенли Кубрика «Сияние», не будет бесконечно печатать одну и ту же фразу.

Все компьютерные программы пытаются описать процессы нашего мира в командах процессора. Поскольку компьютер ничего не знает об объектах нашего мира, программисту всегда приходилось «переводить» всё на язык цифр и инструкций. Так было до 70-х годов, пока не появилась объектно ориентированная парадигма программирования. С её помощью оказалось возможным программирование на уровне объектов из нашего мира, а не на уровне цифр из мира компьютерного. Данная отрасль переживает частые взлеты и падения, поэтому вряд ли кто-то может сказать, что произойдет через следующие 10 – 20 лет.

Конференций проходит много, и было ещё больше сообщений о домогательствах. Язык Ruby, предпочитаемый язык братства стартаперов, получил худшую репутацию. На конференции по Ruby в 2009 году кто-то выступил с речью озаглавленной «Perform Like a Pr0n Star» c вызывающими слайдами. Он приносит документы, каждый из которых имеет свое название. Функциональные требования представляют собой комплект, по крайней мере, тысячи формулировок о том, как правильно пользователь должен щелкать кнопкой.

Предположим, что существует таблица под названием BOOKS (КНИГИ) и в ней строка, где хранится книга под идентификационным номером 294. Идентификационные номера – это очень важный элемент базы данных. Представьте себе базу данных язык программирования фортран книжного магазина. В ней есть таблица клиентов со списками покупателей. И в ней есть продуманная промежуточная таблица покупок, которая включает в себя строки, где фиксируется каждый момент, когда покупатель приобретает книгу.

Несмотря на назойливую рекламу и своекорыстные фантазии программистов, программирование не представляет собой самую главную творческую задачу, которую можно вообразить. Вместо того чтобы беспокоится о том, где в памяти хранятся слова и пошагово идентифицировать каждую букву, языки программирования разрешают вам думать о таких вещах, как строки, массивы и деревья. Это именно то, что вам предоставляет программирование. Вы можете заглянуть через плечо программиста и думать, что код является сложной и скучной штукой, но он тщательно скрывает однообразную скуку, которая невообразимо бесконечна. Мир кодов наполнен акронимами (словами, составленными из начальных элементов словосочетания). «К» смоделирован на другом языке, который называется APL, что означает A Programming Language (язык программирования).

Почему Программисты Так  Чувствительны К Языкам?

Тоже самое было воплощено в флеше (намёк на Sex Album для ZX Spectrum). Хотя флеш делался уже под линейную адресацию видеопамяти без всяких цветовых страниц запакованных в байт нескольких пикселей и обрабатываемых современными процессорами. В результате, продукт построенный на такой идее оказался настолько удачным и востребованным что вытеснил Java практически отовсюду где её/его позиции были очень сильны. А это уже действительно нечто новое даже в названии – утилита «рендеринга» исходных текстов Fortify Вторым «взрывом» стали языки Lisp и Algol, появившиеся примерно в одно время. Они принесли и новые механизмы реализации функциональности, и новые синтаксические и семантические конструкции.

1 Красота Библиотеки Стандартных Программ

Если что-то пошло не так — образуется утечка памяти, и приложение неизбежно (это вопрос времени) остановится с ошибкой об исчерпании всей доступной памяти. И тут на помощь приходит функциональное программирование, которое сводит к минимуму (а в идеале полностью исключает) использование общих данных, что позволяет легко и просто выполнять программу на разных ядрах. На сегодняшний день самым популярным языком программирования является Java. Вы можете это прочувствовать, заветное слово «Старший».

Лексемами являются ключевые слова, идентификаторы, символы операций, комментарии, пробелы и разделители. Лексический анализатор не только выделяет лексемы, но и определяет тип каждой лексемы. При этом на этапе лексического анализа составляется таблица символов, в которой каждому идентификатору сопоставлен свой адрес. Это позволяет при дальнейшем анализе вместо конкретного значения (строки символов) использовать его адрес в таблице символов.

Представьте себе, все жители города занимаются программированием. Программу, написанную на языке программирования высокого уровня, называют исходной программой, а каждую самостоятельную программную единицу, образующую данную программу, — программным модулем. Для преобразования исходной программы в ее выполняемую форму (выполнимый файл) транслятор выполняет некоторую последовательность действий. Эта последовательность зависит как от языка программирования, так и от конкретной реализации самого транслятора. В ходе трансляции важно не просто откомпилировать программу, а получить при этом достаточно эффективный код. Ключевое слово fortran используется для организации связи программ, написанных на языках Си и Фортран.

Платформы могут нанести обиду, потому что они упреждают ваши проблемы и применяются тысячами пользователей. Они предполагают, что ваши проблемы — общие и ежедневные, а не особенные и загадочные, которые требуют решения усилиями только гениальной личности. Основой для платформ является чувство разочарования, они обвязаны тесьмой и попадают в интернет вместе с постом блогера.

21,970FansMe gusta
0SeguidoresSeguir
0SeguidoresSeguir
0SuscriptoresSuscribirte
- Advertisement -

Recent Posts